The Framptone 3 Banger is a high end amp switcher handmade in the America. It's much more than simply an A/B box. It is a non-MIDI solution to accessing the best of both amp worlds for a host of musicians. Its quiet-switching operation, well-crafted construction, and ease of use are among its best features. The Framptone Amp Switcher will allow you to switch between or combine amplifiers without the common problems encountered when using an A/B type box.
Such problems include ground loops, instrument loading/signal loss, switching noise, and phasing. Ground Loops- When splitting an instrument signal to or switching between multiple amplifiers, it is common to have a loud, ground hum. In the Framptone Amp Switcher, this is solved by the use of the highest quality isolation transformer, which electronically isolates the ground between amplifiers. The 3 Bangers Solves these problems.
Instrument Loading/Signal Loss: When splitting an instrument signal to multiple amplifiers, sound quality is lost because the high impedance output of guitars and basses is not suited to feed more than one high impedance amplifier input. The Framptone Amp Switchers instrument input is fed through a custom-designed buffer circuit which converts the instrument input to a low impedance signal allowing the instrument signal to be fed to many amplifiers simultaneously without suffering ANY signal loss or degradation. Phasing: When combining two amplifiers, occasionally they can be out of phase with each other causing a thin, bright sound. The Framptone Amp Switcher is equipped with a phase-reversal switch, accessed right above the battery holder inside the unit. The N side is for normal phase (most applications) and the R side will reverse the phase of amplifier B, immediately eliminating the out of phase condition.
Operation: First, make sure both amplifiers are grounded (dont use a 2-prong AC ground lift plug). Next, plug instrument and amplifiers into their respective inputs on the Framptone Amp Switcher. WARNING- NEVER connect any line or speaker level signals to the Framptone Amp Switcher.
Next, provide power to the Framptone Amp Switcher by either 9 volt battery internally in unit or external AC adapter (see below). On power-up, the Red LED will be illuminated (Amp A) and the A/B button will toggle between amps. The BOTH button will combine both amps and in this mode, a Last Amp On feature indicates the amp you will return to via a flashing LED when leaving the BOTH mode.
Also, while in the BOTH mode, the Last Amp On can be toggled by using the A/B button. With instrument volume off listen for ground hum and set ground switch on the Framptone Amp Switcher accordingly.In the event of an out of phase problem while in BOTH mode, remove the bottom panel by unscrewing the four (4) rubber feet and flip the phase switch (above battery holder). You are now ready to utilize the most flexible and greatest sounding amp switcher available. Programmable Modes: The Framptone Amp Switcher is now equipped with two (2) programmable options which can be preset to fit your musical needs. The first is the ability to change the flashing Last Amp On feature to a solid, non-flashing LED. The second option provides the ability to mute both amps silent guitar changes, silent tuning, etc. Simply remove the bottom cover of the unit and set the labeled dip switches (located under battery holder on circuit board) accordingly.
For extended use, it is recommended that a power adapter be used to avoid disruption of signal due to battery failure. You will not be sorry. Incredible pow at a fair price. There can't be many of these around. I will carefully pack this item in foam peanuts; tissue and bubble wrap to insure a safe arrival.Don't miss out on this one; it may be a l-o-n-g time before another one turns up. I have other items, Etc. It is a good investment as it will provide many years of enjoyment service and be worth more in the future.
A picture really is worth a thousand words! (Photos are of actual item) Thanks for looking! I hope this is just what you are looking for. I have a lot of items that will probably take me a year to list so keep watching and thank you, cooldady-0. If youre cool, welcome to a world of fun and interesting items.
YOUR COMPLETE SATISFACTION IS MY MAIN GOAL. SO PLEASE REMEMBER IF THERE ARE ANY PROBLEMS NOT MENTIONED, OR YOUR UNHAPPY WITH YOUR ITEM. CHECK OUT MY FEEDBACK FOR ALL OF MY SATISFIED CUSTOMERS OVER THE PAST 20 YEARS. ITEMS Meticulously wrapped in foam and bubble wrap!! The item "Keeley Framptone 3 Banger Amp Switcher Foot Switch A/B/C/Y Pedal True Bypass VTG" is in sale since Wednesday, September 16, 2020.
This item is in the category "Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Other Guitar Effects Pedals". The seller is "cooldaddy-0" and is located in Batavia, New York.
This item can be shipped worldwide.