The rate of the tremolo can be controlled with either the SPEED control or an external Tap Tempo foot switch. The MULTIPLY control selects the tempo multiplier. (Quarter note division) This allows you to tap a wide range of speeds easily.
The Tap input socket is located on the top of the pedal above the DC socket. A 6.35mm to 3.5mm mono cable is required. (1/4 inch to 1/8 inch) Or a 6.35mm to 3.5mm adapter attached to a standard guitar cable can be used. The VOLUME control allows you to compensate for any perceived volume difference that can occur when using tremolo. The LED located next to the foot switch indicates the speed and depth setting of the pedal in both bypass and active modes.
The LED colour changes to signify whether the pedal is active or bypassed. Volume, Multiply, Speed, Depth and Wave controls. High input impedance and low output impedance. 9-18V DC centre negative adapter operation.
Top mounted Jacks, Tap socket and DC socket. Tap Tempo via external tap switch. Standard momentary tap switch with normally open contact required. The item "Magnetic Effects ElectroChop Optical Tremolo with True Bypass Guitar Effects Pedal" is in sale since Sunday, November 10, 2019.This item is in the category "Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Other Guitar Effects Pedals". The seller is "*pitbullaudio*" and is located in National City, California. This item can be shipped worldwide.